pr100, pr135, pr182 www.vishay.com vishay dale thin film revision: 08-jan-13 1 document number: 53039 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high precision resistor thin film network, surface mount leadless arrays pr arrays can be used in mo st applications requiring a matched pair (or set) of resistor elements. the networks provide 2 ppm/c tcr tracking, a ratio tolerance as tight as 0.02 % and outstanding stability. they are available in 1 mm, 1.35 mm and 1.82 mm pitch. features ? gold terminations over nickel barrier ? high stability passivated nichrome resistive layer ? tight tcr (10 ppm/c) and tcr tracking (to 2 ppm/c) ? very low noise and voltage coefficient < - 30 db, 0.1 ppm/v typical ? ratio tolerance to 0.02 % ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 schematic product may not be to scale standard electrical specifications test specifications conditions material passivated nichrome - pin/lead number -- resistance range 100 ? to 200 k ? (pr100) - 100 ? to 300 k ? (pr135) 100 ? to 1 m ? (pr182) tcr: absolute 10 ppm/c - 55 c to + 125 c tcr: tracking 2 ppm/c - 55 c to + 125 c tolerance: absolute 0.1 % to 10 % - tolerance: ratio 0.02 % to 0.1 % - power rating: resistor 100 mw (pr100) at + 70 c 125 mw (pr135) 200 mw (pr182) power rating: package -- stability: absolute -- stability: ratio -- voltage coefficient ? 0.1 ppm/v - working voltage 35 v (pr100) - 75 v (pr135) 100 v (pr182) operating temperature range - 55 c to + 125 c - storage temperature range - 55 c to + 150 c - noise ? - 30 db - thermal emf -- shelf life stability: absolute -- shelf life stability: ratio -- number of resistors: 2 to 8 r 1 = r 2 = .... r 8 schematic a: independent resistors electrical diagram r 1 r 2 r 7 r 8
pr100, pr135, pr182 www.vishay.com vishay dale thin film revision: 08-jan-13 2 document number: 53039 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) where n = number of resistors ? 2 mils unless specified packaging waffle-pack or tape and reel marking on the primary package, printed information includes vishay trademark series and mode l, schematic number of resistors, ohmic value, absolute tolerance, ratio tolerance, type of termination dimensions in mils dimension pr100 pr135 pr182 a 64 6 72 6 118 6 b 17 20.3 23.6 c 30 43.3 61.8 d101010 e (1) e = (n x f) 8 e = (n x f) 8 e = (n x f) 8 f 40 53.3 71.8 g151515 mechanical specifications substrate alumina 99.6 % technology thin film film passivated nichrome terminations solderable gold (au) over nickel cf d a b e g derating curve ambient temperature c 070 155 0 20 40 60 80 100 precent of rated power
pr100, pr135, pr182 www.vishay.com vishay dale thin film revision: 08-jan-13 3 document number: 53039 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) > 1 k ? , max. 4 resistors (2) > 100 ? , up to 8 resistors (3) please refer to below table for tape and reel availability note ?? not available, consult factory global part number information new global part numbering: pr100a41002bbgts global model schematics number of resistors resistance absolute tolerance ratio tolerance termination packaging pr100 pr135 pr182 a = isolated resistors 2 3 4 5 6 7 8 first 3 digits are significant figures and the last digit specifies the number of zeros to follow. example: 1000 = 100 ? 1001 = 1000 ? b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % g = 2 % j = 5 % k = 10 % p = 0.02 % (1) w = 0.05 % (2) b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % g = wraparound au over ni termination e4 epoxy solderable ws = waffle 100 min., 1 mult ts = tape and reel (3) 100 min., 1 mult t0 = 100 min., 100 mult t1 = 1000 min., 1000 mult t3 = 300 min., 300 mult t5 = 500 min., 500 mult historical part number example: pr100a 41002bbgt (for reference purposes only) pr100 a 4 1002 b b g t series schematic number resistance absolute tolerance ratio tolerance termination packaging tape and reel availability number of resistors pr100 pr135 pr182 2 available available available 3??available?? 4 available available available 5 ?? available available 6 available available ?? 7??available?? 8 available ?? ?? 100a 100 4 pr bbg 2 t s
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
